BM TRADA certified fire stopping, fire doors and compartmentation surveys for warehouses, new build blocks, shared homes and offices across Enfield Town, Edmonton, Southgate, Palmers Green and Ponders End.
Our recent work includes West End theatres, a hotel at Liverpool Street, a live venue at Battersea Power Station and a TV studio in Acton. On every job, we plan noise, dust and access around the people using the building.
Each project brought challenges found in buildings right across London: historic fabric, busy occupants and fire lines broken by other trades. We photograph each seal before it is covered, then hand over certificates, datasheets and as-built drawings, so landlords, managing agents and fire risk assessors have proof the work was done.

Hospitality & Leisure
Covent Garden, London
Fire stopping at the Lyceum Theatre, Covent Garden: fire lines reinstated after a new fire alarm, every seal photographed for the theatre's records.
Read Case Study

Hospitality & Leisure
Strand, London
Fire stopping at the Savoy Theatre, Strand: alarm cabling breaches sealed and recorded for the theatre's next fire risk assessment.
Read Case Study
We work across all 32 London boroughs, from period conversions in central London to new build blocks and industrial sites further out. Find your area below to see how we can help.
CAMDEN, ISLINGTON, KENSINGTON & CHELSEA AND WESTMINSTER
BARNET, BRENT, ENFIELD, HARINGEY AND HARROW
HACKNEY, NEWHAM, TOWER HAMLETS AND WALTHAM FOREST
BARKING & DAGENHAM, HAVERING AND REDBRIDGE
EALING, HAMMERSMITH & FULHAM, HILLINGDON AND HOUNSLOW
KINGSTON, MERTON, RICHMOND AND WANDSWORTH
CROYDON, LAMBETH, SOUTHWARK AND SUTTON
BEXLEY, BROMLEY, GREENWICH AND LEWISHAM
In conversions, refurbishments and new builds, pipes, cables and ducts are run through fire-rated walls and floors, and every one leaves a gap. We seal each penetration with tested, certified systems that suit the building's construction, then photograph each seal before it is covered up.
Hidden voids behind walls, under floors and in roof spaces can carry fire unseen from one flat to the next. In older buildings, later alterations can open up new routes. We install cavity barriers in line with Building Regulations, the latest Building Control guidance and your building's fire strategy.
A fire door only works when the whole set is right, from the frame and seals to the closer. For landlords, managing agents and facilities managers, we inspect, install and maintain fire doors under our BM TRADA certification, with photo evidence for every door we check.
If you do not know the condition of your building's fire compartments, a survey is the place to start. We check walls, floors, risers and voids, find every breach and give you a clear report, plus a written price for any remedial work it uncovers.
When a fire risk assessment flags breaches, or old fire stopping no longer meets current standards, we put it right. We remove failed or non-compliant materials, reinstate them with certified systems and plan the work around residents and tenants to keep disruption to a minimum.
If you let a property in Enfield, check whether it needs a licence. Since 1 September 2026, selective licensing has covered privately rented homes in 17 wards, including Edmonton Green, Ponders End and Enfield Lock. Additional licensing covers smaller shared homes across the whole borough, and larger HMOs need a mandatory licence. Our photographed, certified seals give you clear fire safety records to keep with your licence.
If you are turning a house into a shared home, you will also need planning permission. A borough-wide Article 4 Direction means that changing a family home into an HMO in Enfield is no longer permitted development, so speak to the council's planning team before work starts. Sound fire separation between rooms is central to a safe layout.
If your building is in Enfield Town, it may be in the Enfield Town Conservation Area. The council describes the town as the borough's principal economic and commercial centre, with many listed buildings. Works that affect a listed building's character need listed building consent, so we survey first and use systems that suit the original construction, with a datasheet for every product used.

Our fire stopping, fire door installation and fire door maintenance are all third-party certified by BM TRADA. You can check the scope of each certificate in the BM TRADA certified supplier directory.
We are independent of manufacturers and other contractors. Whether it is a listed building or a modern block, our advice follows compliance and real risk, not a product we need to sell.
Each seal is photographed before it is covered. You receive installation certificates, product datasheets and as-built drawings, ready for your fire risk assessor, Building Control and insurer.
Your site survey is free, with no obligation. We explain what we find in plain English and offer a one-day turnaround on quotes, with nothing added that you have not approved.
FAQS
Yes. Brimsdown is one of London’s largest industrial estates, and units on working sites like this often have services added through fire-rated walls as businesses change. We fire stop around those services using durable materials suited to working sites, plan the work around your operations to keep downtime to a minimum, and photograph and certify every seal once the job is done.
Yes. New build blocks need every service penetration sealed before ceilings and risers are closed. We work to the main contractor’s programme, photograph each seal as it is fitted and hand over certificates, datasheets and as-built drawings, so the records are ready for Building Control at handover.
Possibly. Selective licensing covers 17 wards, and additional licensing covers smaller shared homes across the borough. Shared homes also need planning permission. Check your address with the council first. We can then fire stop between rooms and floors, upgrade fire doors and give you certified records to keep with your licence paperwork.
Yes. We survey first to understand how the building was constructed, then choose a fire stopping system that suits it. Each system comes with its product datasheet, so your architect or the council can see exactly what was installed. Check with the council’s planning team whether consent is needed.
The price depends on how many penetrations there are, what passes through them, how easy they are to reach and whether the building is occupied. The survey is free with no obligation, you receive a written price for the agreed scope, and we offer a one-day turnaround on quotes. Drawings or a fire risk assessment sent in advance help us prepare. Call 020 8798 2580 or book your survey online.
Phone
Contact us for immediate assistance or questions.
0208 798 2580
For enquiries related to our services, please reach out.
[email protected]
CONNECT
Main contractors can send drawings or a package for pricing. Facilities managers can attach the fire risk assessment. Zak or Ryan will come back to you with a time to visit.
We use your details only to reply to this enquiry. Privacy policy